Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
5 Cards in this Set
- Front
- Back
- 3rd side (hint)
What type of "gauge" is connected to the standpipe, and why?
|
Inline Standpipe Gauge, otherwise, there is no way to know the pressure from the standpipe.
This is analogous for placing the "attack engine" on the standpipe floor. HRTM 9, 8 |
|
|
Who is usually the standpipe control person?
|
Fire Attack 1 Specialist
HRTM 9,(1) |
|
|
If using a 2-1/2" gated wye, what do you use to control water flow?
|
Standpipe wheel, NOT the handle on the wye.
HRTM 10,(11) |
|
|
What things must be done when ready to open the standpipe wheel to charge the line?
|
-Must have a firefighter at each elevation change while charging, to keep hose from moving...
-Rule of Thumb is to open wheel all the way, then turn back two half turns... -Flush nozzle until pressure reading on in-line gauge indicates pressure listed on gauge for amount of hose in use... -Pressure control on the in-line guage is responsibility of Standpipe Control Person. |
- water flow from standpipe should make the building fire pump start resulting in a noticeable increase in pressure and flow. If this does not occur, inform command that the pump needs to be started manually or FDC supplied.
HRTM 10 (12) |
|
What is the purpose of the Elbow in the standpipe operations?
|
Reduces kinks
May assist in directing the hose up the stairwell. HRTM 9 (7) |
|