• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/4

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

4 Cards in this Set

  • Front
  • Back

Overheating of boiler heating surfaces due to low water:


1) Cannot occur if the boiler is a hot water unit


2) Will cause a furnace explosion


3) Can be prevented with proper water treatment


4) Is the main cause of boiler failure


5) Can be eliminated with a low water fuel cutoff

4) Is the main cause of boiler failure

The main controlling device used with an On/Off combustion fuel control is a _____ sensing element.


1) Pressure


2) Electronic


3) Temperature


4) Level


5) Pneumatic

1) Pressure

Modulating pressure controller output:


1) Will shut down and start up the burner


2) Will control the temperature of the furnace


3) Will control the boiler output


4) Will vary the fuel and air flow to the boiler


5) Can be used on small boilers only

4) Will vary the fuel and air flow to the boiler

The low water cutoff can be tested by:


1) Shutting off the feed water


2) Opening the safety valve


3) Raising steam pressure


4) Shutting off the fire


5) Closing the steam discharge valve

1) Shutting off the feed water