Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
141 Cards in this Set
- Front
- Back
|
What is the purpose of deficiency reports?
A. A.Deficiency reports identify, report, and track deficiencies involving AF personnel. B. B.Deficiency reports identify, report, and track deficiencies on AF aircraft only. C. Deficiency reports, and track deficiencies on AF motor vehicles, equipment, components, major assemblies, and subassemblies of the same. D. D.Deficiency reports identify, report, and track deficiencies and improvements on AF motor vehicles, equipment, components, major assemblies, and subassemblies of the same |
C. Deficiency reports, and track deficiencies on AF motor vehicles, equipment, components, major assemblies, and subassemblies of the same.
|
|
|
Which category report would you submit for an incident that involved the serious injury of an individual?
A. Category I B. Category II C. Category III D. Category IV |
A. Category I
|
|
|
What vehicle maintenance deficiency report would best be submitted where a situation has the potential for loss of life?
A. Information Warranty Satisfactory Report B. Action Warranty Report C. Vehicle Unsatisfactory Report D. Material Deficiency Report |
D. Material Deficiency Report
|
|
|
What vehicle maintenance deficiency report would best be submitted where the depot overhaul of an assembly is unsatisfactory?
A. Information Warranty Satisfactory Report B. Action Warranty Report C. Vehicle Unsatisfactory Report D. Materiel Deficiency Report |
C. Vehicle Unsatisfactory Report
|
|
|
What vehicle maintenance deficiency report would best be submitted where the district or zone representative refuses to make valid warranty repairs on a vehicle?
A. Information Warranty Report B. Action Warranty Report C. Vehicle Unsatisfactory Report D. Materiel Deficiency Report |
B. Action Warranty Report
|
|
|
Material Deficiency Report (MDR) DULL SWORD is best used when?
A. A manufacturer refuses to make repairs to a vehicle under warranty. B. A situation that is associated with nuclear surety vehicles. C. A situation that, if uncorrected, would cause loss of life. D. A vehicle maintenance manager determines errors in workmanship. |
C. A situation that, if uncorrected, would cause loss of life.
|
|
|
What T.O. best governs the circumstances for submitting an information only warranty?
A. T.O 00-5-15 B. T.O. 00-35D-54 C. T.O. 36-1-191 D. T.O. 36A-1-1301 |
C. T.O. 36-1-191
|
|
|
What publication provides guidance for the preparation and routing of an MDR (DULL SWORD)?
A. T.O. 36-1-191 B. AFI 24-302 C. T.O. 00-35D-54 D. AFI 91-204 |
D. AFI 91-204
|
|
|
What is the report-processing point responsible for certifying the validity, completeness, and accuracy of the draft report?
A. Originating Point B. Screening Point C. Contact Point D. AF Action Point |
B. Screening Point
|
|
|
What point in the DR process is responsible for preparing the draft report within vehicle maintenance?
A. Originating Point B. Screening Point C. Contact Point D. AF Action Point |
A. Originating Point
|
|
|
What forum is responsible for reviewing reported vehicle deficiencies and establishing priorities for resolution?
A. Vehicle Fleet Managers B. MAJCOMS C. Vehicle Improvement Working Group D. ALC Single Managers |
C. Vehicle Improvement Working Group
|
|
|
. Which TCTO category is best associated with an unsafe condition that could result in death or fatal injury and are recognized by a border of red X’s?
A. Immediate B. Urgent C. Routine D. Interim |
A. Immediate
|
|
|
. What TCTO corrects deficiencies of a material, mechanical, or technical nature that, if uncorrected, could create a hazard through prolonged use?
A. Immediate B. Urgent C. Routine D. Interim |
C. Routine
|
|
|
Which publication is issued when circumstances preclude timely publication of emergency instructions such as a TCTO?
A. TCTO Supplement B. One-Time Inspection C. Retrofit Bulletin D. Interim TCTO |
D. Interim TCTO
|
|
|
Which publication is best associated with extending the rescission date of a TCTO?
A. TCTO Supplement B. One-Time Inspection C. Retrofit Bulletin D. Interim TCTO |
A. TCTO Supplement
|
|
|
Which publication is best used to amend the basic TCTO already issued?
A. TCTO Supplement B. One-Time Inspection C. Retrofit Bulletin D. Interim TCTO |
A. TCTO Supplement
|
|
|
Who is responsible for scheduling TCTO repairs according to availability of the vehicles and materials?
A. Work Center Supervisor B. Vehicle Fleet Manager C. VM&A D. Materiel Control |
C. VM&A
|
|
|
Which statement best describes an “outstanding” TCTO?
A. A TCTO that is not accomplished five days after being delivered to VM&A. B. A TCTO that is not accomplished within the first 180 days after it arrives on base. C. A TCTO that is not accomplished as specified in the “when the work will be accomplished” portion of the TCTO. D. A TCTO that is not accomplished by the rescission date. |
C. A TCTO that is not accomplished as specified in the “when the work will be accomplished” portion of the TCTO.
|
|
|
What is the delayed maintenance code best associated with deferring TCTO parts kits and returning the vehicle to the using organization?
A. A B. B C. C D. D |
D. D
|
|
|
Who is responsible for advising MAJCOM, and within how many hours must this be accomplished when a TCTO becomes outstanding?
A. VM&A within 24 hours B. Vehicle Fleet Manager within 24 hours C. VM&A within 8 ours D. Vehicle Fleet Manager within 8 hours |
B. Vehicle Fleet Manager within 24 hours
|
|
|
Who uses the D-18 to track TCTO kits on order through base supply?
A. Work Center Supervisor B. Vehicle Fleet Manager C. VM&A D. Materiel Control |
D. Materiel Control
|
|
|
. Who are service bulletins prepared by to correct deficiencies that discovered during vehicle production and the duration of its warranty?
A. Manufacturer B. Vehicle Maintenance C. WR-ALC D. MAJCOM |
A. Manufacturer
|
|
|
Who will take necessary action to ensure they receive all service bulletins for vehicles after they have entered the AF inventory?
A. Manufacturer B. Vehicle Maintenance C. WR-ALC D. MAJCOM |
C. WR-ALC
|
|
|
With what work order prefix will the CZ transaction update automatically for a service bulletin?
A. B B. D C. S D. T |
C. S
|
|
|
. What system is best described as a MAJCOM program used to consolidate their bases’ specific information and forward to Warner Robins ALC?
A. SBSS B. REMS C. OLVIMS D. CAFVIMS |
D. CAFVIMS
|
|
|
What system do we receive parts and fuels issues from?
A. Accounting and Finance System B. Standard Base Supply System C. Registered Equipment Management System D. Command Air Force Vehicle Integrated Management System |
B. Standard Base Supply System
|
|
|
What system provides status of vehicle in the shop?
A. Accounting and Finance System B. Standard Base Supply System C. Online Vehicle Interactive Management System D. Command Air Force Vehicle Integrated Management System |
C. Online Vehicle Interactive Management System
|
|
|
Who issues guidance to measure and monitor labor-hour productivity within vehicle maintenance?
A. Director of Warner Robins/ALC B. Office of the Secretary of Defense C. Office of the Secretary of the Air Force D. Office of the President of the United States |
B. Office of the Secretary of Defense
|
|
|
. What category of labor is best associated with an individual on annual leave?
A. Direct B. Vehicle Operator C. Indirect Productive D. Indirect Non-productive |
D. Indirect Non-productive
|
|
|
What type of time is it when a mechanic takes time off during duty hours to get a haircut?
A. 01-Direct Labor B. 20-Indirect Productive C. 40-Indirect Non-Productive D. 50-Indirect Non-Productive |
D. 50-Indirect Non-Productive
|
|
|
. What type of time is it when a civilian VM&A goes on annual leave?
A. 01- Direct Labor B. 20-Indirect Productive C. 40-Indirect Non-Productive D. 50-Indirect Non-Productive |
C. 40-Indirect Non-Productive
|
|
|
Turning in your minor maintenance work orders on time will increase your 01 direct labor hours for the month?
A. True B. False |
A. True
|
|
|
When calculating available hours, all government holidays are included?
A. True B. False |
B. False
|
|
|
What type of time is being calculated when computing the available hours for the month?
A. 01-Direct Labor B. 20-Indirect Productive C. 40-Indirect Non-Productive D. 50-Indirect Non-Productive |
B. 20-Indirect Productive
|
|
|
Which form is best used to install a marker light, from low-cost bench stock, using less than one labor-hour?
A. AFTO Form 91 B. AF Form 1827 C. AF Form 1832 D. AF Form 1823-1 |
B. AF Form 1827
|
|
|
What labor code(s) may be used in the overtime block of the minor maintenance work order(AF Form 1827)?
A. T-Training B. 4-Overtime worked C. 5-Holiday time worked D. Both4-Overtime worked and 5-Holiday time worked |
D. Both4-Overtime worked and 5-Holiday time worked
|
|
|
. Which form is used to document the installation of a part having a warranty?
A. AFTO Form 91 B. AF Form 1827 C. AF Form 1832 D. AF Form 1823 |
D. AF Form 1823
|
|
|
What form is to be used for documenting your leave?
A. 1823-1 B. 1831-1 C. 1827 D. 1832 |
B. 1831-1
|
|
|
What form is used to authorize cannibalization of vehicle parts?
A. 1823-1 B. 1831-1 C. 1827 D. 1832 |
D. 1832
|
|
|
Who authorizes cannibalization to take place?
A. Materiel Control B. Work Center Supervisor C. Vehicle Fleet Manager D. Vehicle Management & Analysis |
C. Vehicle Fleet Manager
|
|
|
What form is used to perform Limited Technical Inspections?
A. AF Form 91 B. AFPD Form 91 C. AFTO Form 91 D. AFMAN 91 |
C. AFTO Form 91
|
|
|
When would an LTI take place?
A. With disposition instructions B. With acceptance into the vehicle fleet C. With Depot repair request D. All of the above |
D. All of the above
|
|
|
What PCN is sorted by assigned group code and reflects vehicle out of commission rates?
A. PCN 8-VOC Report B. PCN 29- Employee Master List C. PCN 23-Vehicle Master List A D. PCN 15-Delayed Maintenance Report |
A. PCN 8-VOC Report
|
|
|
How is the PCN 8 sorted?
A. Management Code then Registration Number B. Group Code then Management Code C. Registration Number D. Group Code |
B. Group Code then Management Code
|
|
|
. Fleet Totals include what types of vehicles?
A. Registered B. Non-registered C. Both registered and non-registered D. Neither registered nor non-registered |
C. Both registered and non-registered
|
|
|
To accomplish an in-depth monthly analysis using the PCN 8, you must print the report on what day of the month?
A. Last B. First C. 15th D. 4th |
A. Last
|
|
|
What transactions will place parts on the PCN 15, 16, and 62?
A. AZ and BZ B. AX and CX C. PZ and VZ D. PX and VX |
C. PZ and VZ
|
|
|
Which report shows a total of all delayed maintenance codes against the fleet?
A. PCN 15 B. PCN 16 C. PCN 62 D. PCN 235 |
A. PCN 15
|
|
|
The PCN 15 is sorted by_________?
A. Bin location B. DIFM parts costs C. Vehicle registration number D. Part or national stock number |
C. Vehicle registration number
|
|
|
How is the PCN 23 sorted?
A. Make and type B. Management code C. Organization code D. Registration number |
B. Management code
|
|
|
What are vehicle equivalents used to determine?
A. Budget B. Vehicle authorizations C. Replacement codes D. Manning |
D. Manning
|
|
|
How is the PCN 24 sorted?
A. Make and type B. Management code C. Organization code D. Registration number |
B. Management code
|
|
|
. The PCN 56 is produced at the end of what months?
A. April, July, October, and January B. January, February, March, and April C. February, May, August, and November D. March, June, September, and December |
D. March, June, September, and December
|
|
|
The PCN 56 shows a collected fuel usage from what monthly PCN?
A. PCN 29 B. PCN 32 C. PCN 46 D. PCN 64 |
B. PCN 32
|
|
|
The majority of errors on the PCN 56 are caused by________.
A. Bogus odometer readings B. Keypunch mistakes C. Misuse of fuel keys D. All of the above |
D. All of the above
|
|
|
07B00205 is showing no fuel consumption but has high mileage for the quarter. What is the probable cause?
A. 07B00205 has been converted to use alternate fuels. B. 07B00205 has excessive delayed maintenance on the PCN 15. C. Organization is fueling several vehicles with the fuel key for 07B00205. D. Organization is filling 07B00205 using a different vehicle’s fuel key. |
D. Organization is filling 07B00205 using a different vehicle’s fuel key.
|
|
|
07B01249 is showing 520 miles for this period and 26 gallons of fuel consumed. What is the miles per gallon (MPG) average?
A. 15 MPG B. 20 MPG C. 25 MPG D. 30 MPG |
B. 20 MPG
|
|
|
What PCN is best used to identify an individual’s primary Air Force Specialty Code (AFSC)?
A. PCN 8-VOC Report B. PCN 29-Employee Master List C. PCN 23-Vehicle Master List A D. PCN 15-Delyaed Maintenance Report |
B. PCN 29-Employee Master List
|
|
|
Who approves items on the PCN 46 High Cost Bench Stock Master List?
A. VM&A B. VFM/VMS C. Materiel Control D. Work Center Supervisor |
B. VFM/VMS
|
|
|
What PCN could be used to check a parts effective warranty date and/or mileage?
A. PCN 23 B. PCN 24 C. PCN 49 D. PCN 62 |
C. PCN 49
|
|
|
A Work Center Supervisor should check the PCN 235 mid-month to_______?
A. Ensure input of minor maintenance hours B. Check the progress of recorded labor hours C. Verify delayed parts are on order with Materiel Control D. Both a and b |
D. Both a and b
|
|
|
What criteria can be used to sort the Yard Check?
A. Work center B. Management code C. Registration number D. Any of the above |
D. Any of the above
|
|
|
What is the purpose of OLVIMS?
A. Provides an on-line, interactive system of records and files which can be viewed only in a real- time manner B. Provides a stand-alone system of files which can be accessed, deleted, and summarized in a real-time manner C. Provides an off-line, interactive system of records and files which can be created, accessed, updated, deleted, exercised, and summarized D. Provides an on-line, interactive system of records and files which can be created, accessed, updated, deleted, exercised, and summarized in a real-time manner |
D. Provides an on-line, interactive system of records and files which can be created, accessed, updated, deleted, exercised, and summarized in a real-time manner
|
|
|
How often does VM&A compare vehicle assets to ensure both base supply and vehicle maintenance equally reflect assets on hand?
A. Weekly B. Monthly C. Annually D. Semi-annually |
B. Monthly
|
|
|
The amount of time expended toward repair of vehicles, equipment, and their accessories is an example of what labor hour category?
A. Direct (01 series) B. Manual (70 series) C. Indirect Productive (20 series) D. Indirect nonproductive (40 and 50 series) |
A. Direct (01 series)
|
|
|
What is the best labor category associated with an individual on annual leave?
A. Direct (01 series) B. Manual (70 series) C. Indirect Productive (20 series) D. Indirect nonproductive (40 and 50 series) |
D. Indirect nonproductive (40 and 50 series)
|
|
|
What is the best labor category associated with maintenance personnel working on an EPR (Enlisted Performance Report)?
A. Direct (01 series) B. Manual (70 series) C. Indirect Productive (20 series) D. Indirect nonproductive (40 and 50 series) |
C. Indirect Productive (20 series)
|
|
|
Available Hours are computed by multiplying_________
A. The duty hours per day times the duty days per month minus the hours that people are TDY B. The duty hours per week times the total number of days in the month C. The duty hours per day times the duty days per month D. The duty hours per day times the total days in the month |
C. The duty hours per day times the duty days per month
|
|
|
Minor maintenance work orders are completed on which form?
A. AF Form 1823 B. AF Form 1824 C. AF Form 1827 D. AF Form 1832 |
C. AF Form 1827
|
|
|
What is the J9996 used to document?
A. Hazardous/solid waste management B. Labor hours in the tire and battery shops for stock buildup C. Labor hours for shop equipment repairs and automotive spares buildup D. Minor maintenance jobs of two hours or less and less than $60.00 in parts |
A. Hazardous/solid waste management
|
|
|
What minor maintenance work order number is used to record labor hours for shop equipment repairs and automotive spares buildup?
A. J9999 B. J9998 C. J9997 D. J9996 |
A. J9999
|
|
|
What form is used when you install deferred parts?
A. AF Form 1823 B. AF Form 1827 C. J9999 D. J9998 |
A. AF Form 1823
|
|
|
A “P” in the delayed work order section of an 1823 indicates what?
A. Paint Complete B. Complete-All parts have been received C. Partial-Some parts have been received against the delayed work order D. Part of the delayed job has been completed and the work order is partially closed |
C. Partial-Some parts have been received against the delayed work order
|
|
|
When are concurrent inspections completed?
A. In conjunction with other inspections B. Only when field repairs are required C. As soon as the vehicle comes into the shop D. Every 3 years |
A. In conjunction with other inspections
|
|
|
An AFTO Form 91 Limited Technical Inspection is processed under which of the following situations?
A. Upon a repair request/return status of a Depot vehicle B. When VM&A accomplishes a no-notice inspection C. Every time a vehicle is issued to a new unit D. Every time a vehicle enters into the shop |
A. Upon a repair request/return status of a Depot vehicle
|
|
|
What form is the Record of Cannibalization?
A. AF Form 1824 B. AF Form 1823 C. AF Form 1827 D. AF Form 1832 |
D. AF Form 1832
|
|
|
What form is required to perform a schedule LOF using 1.7 labor hours?
A. AFTO Form 91 B. AF Form 1827 C. AF Form 1832 D. AF Form 1823-1 |
D. AF Form 1823-1
|
|
|
What form is used to install a marker light, from low cost bench stock, using less than one labor hour?
A. AFTO Form 91 B. AF Form 1827 C. AF Form 1832 D. AF Form 1823-1 |
B. AF Form 1827
|
|
|
What type of hours can be used in the overtime block of the minor maintenance work order (AF Form 1827)?
A. T-training B. 4-Overtime worked C. 5-Holiday time worked D. Both 4-Overtime worked and 5-Holiday time worked |
D. Both 4-Overtime worked and 5-Holiday time worked
|
|
|
What is used to document the installation of a part having a warranty?
A. AFTO Form 91 B. AF Form 1827 C. AF Form 1832 D. AF Form 1823 |
D. AF Form 1823
|
|
|
Who determines the most economical method of obtaining depot repairs on vehicles?
A. Work Center Supervisor B. Vehicle Fleet Manager C. MAJCOM D. ALC Production Manager |
D. ALC Production Manager
|
|
|
Depot-level maintenance supports what type of maintenance?
A. Intermediate maintenance B. Organizational maintenance C. Mobility maintenance D. Quality maintenance |
A. Intermediate maintenance
|
|
|
Who certifies that vehicle repairs are beyond a shop’s capability?
A. Work Center Supervisor B. Vehicle Fleet Manager C. MAJCOM D. ALC Production Manager |
C. MAJCOM
|
|
|
Depot estimated repairs and one way transportation should not exceed what percentage of the depot eligible vehicle’s replacement cost?
A. 25 percent B. 50 percent C. 75 percent D. 100 percent |
C. 75 percent
|
|
|
What is the repair code, listed in the ML-C FED LOG, which identifies a vehicle’s depot eligibility?
A. Code P B. Code Q C. Code R D. Code S |
D. Code S
|
|
|
A vehicle is ineligible for depot overhaul if a replacement from new procurement can be supplied within how many months?
A. 6 months B. 12 months C. 18 months D. 24 months |
B. 12 months
|
|
|
Who determines if a vehicle is unworthy of continued depot overhaul due to age or obsolescence of major components?
A. Vehicle Manufacturer B. Vehicle Fleet Manager C. MAJCOM D. WR-ALC/LE |
D. WR-ALC/LE
|
|
|
By what date must a base submit its revalidation of depot requirements and their five-year projections to the Parent MAJCOM?
A. 1 January B. 15 May C. 15 July D. 15 August |
C. 15 July
|
|
|
Who consolidates the Depot LTIs and forwards them with a cover letter to WR-ALC?
A. VM B. VFM C. VM&A D. MAJCOM |
C. VM&A
|
|
|
What is the number of “out years” within a standard depot plan?
A. 2 out years B. 3 out years C. 4 out years D. 5 out years |
D. 5 out years
|
|
|
What items would you use when developing the Depot plan?
A. LTI and Due-In listing B. LTI, Due-In listing, and VAL C. VAL and Work Order D. Due-In listing, VAL, and Work Order |
B. LTI, Due-In listing, and VAL
|
|
|
What is the first OLVIMS replacement code used for a vehicle returning from depot?
A. Code R B. Code S C. Code T D. Code U |
B. Code S
|
|
|
What is the maximum number of months OLVIMS will maintain a depot overhauled vehicle in replacement code “S”?
A. 24 months B. 36 months C. 48 months D. 60 months |
D. 60 months
|
|
|
What is the new “good until date” for a vehicle manufactured in the year 2000 with an original life expectancy of 16 years that returned from depot in 2012?
A. 2013 B. 2016 C. 2019 D. 2021 |
C. 2019
|
|
|
What deficiency report is mandatory when discrepancies are discovered on a vehicle returning from depot overhaul?
A. Vehicle Unsatisfactory Report B. Action Warranty Report C. Information Warranty Satisfactory Report D. Materiel Deficiency Report |
A. Vehicle Unsatisfactory Report
|
|
|
What is the warranty period assigned to a depot overhauled vehicle?
A. As specified by the overhaul facility B. 90 days after arrival on base C. 90 days after shipment from the overhaul facility D. As specified by each individual contract |
D. As specified by each individual contract
|
|
|
Who has the authority to contact the overhaul contractor to resolve warranty discrepancies on a vehicle returned from depot overhaul?
A. Work Center Supervisor B. Vehicle Fleet Manager C. MAJCOM D. ALC Production Manager |
A. Work Center Supervisor
|
|
|
What position is responsible for participating in an organization’s budget development for integration into the base budget?
A. Base Budget Officer B. Responsibility Center Manager C. Resource Advisor D. Cost Center Manager |
C. Resource Advisor
|
|
|
What position is responsible for regulating the day-to-day consumption of work hours, supplies, equipment, and services?
A. Base Budget Officer B. Responsibility Center Manager C. Resource Advisor D. Cost Center Manager |
D. Cost Center Manager
|
|
|
What individual(s) are the best source of financial management advice to local commanders and their staff on budget matters?
A. Base Budget Officer B. Resource Advisor C. Cost Center Manager D. Both B and C |
A. Base Budget Officer
|
|
|
Which role in the budget process does the VFM/VMS normally play?
A. Base Budget Officer B. Responsibility Center Manager C. Resource Advisor D. Cost Center Manager |
D. Cost Center Manager
|
|
|
What position is responsible for preparing the base budget and forwarding it to the parent MAJCOM?
A. Base Budget Officer B. Responsibility Center Manager C. Resource Advisor D. Cost Center Manager |
A. Base Budget Officer
|
|
|
Which budget code is commonly displayed as a three-or five-digit code and identifies the type or kind of expenditure incurred?
A. Element of Expense Investment Code B. Responsibility Center/Cost Center Code C. Base Supply Organization Code D. Fund Cite Code |
A. Element of Expense Investment Code
|
|
|
Which budget code is displayed as a six-digit code and identifies where/who resources are consumed?
A. Element of Expense Investment Code B. Responsibility Center/Cost Center Code C. Base Supply Organization Code D. Fund Cite Code |
B. Responsibility Center/Cost Center Code
|
|
|
Which element of expense investment code is normally associated with a purchase of a piece of equipment through base supply?
A. 409 B. 569 C. 609 D. 628 |
D. 628
|
|
|
Which element of expense investment code is normally associated with the purchase of stock funded, general supply type items from base supply?
A. 409 B. 569 C. 609 D. 628 |
C. 609
|
|
|
Which element of expense investment code is normally associated with TDY travel and per diem?
A. 409 B. 569 C. 609 D. 628 |
A. 409
|
|
|
Who is responsible for advising and assisting supervisors in the development and use of training requirements?
A. Trainee B. Work Center Supervisor C. Training Leader D. Unit Training Manager |
C. Training Leader
|
|
|
Who is responsible to recommend, to commanders, ways to satisfy qualification and skill-level upgrade requirements?
A. Trainee B. Work Center Supervisor C. Training Leader D. Unit Training Manager |
D. Unit Training Manager
|
|
|
Who is responsible for identifying qualification and upgrade requirements for the work center and individuals?
A. Trainee B. Work Center Supervisor C. Training Leader D. Unit Training Manager |
B. Work Center Supervisor
|
|
|
Who is responsible for accepting all opportunities for upgrade and qualification training?
A. Trainee B. Work Center Supervisor C. Training Leader D. Unit Training Manager |
A. Trainee
|
|
|
Who is responsible for conducting and documenting an initial evaluation of knowledge and skills?
A. Trainee B. Work Center Supervisor C. Training Leader D. Unit Training Manager |
B. Work Center Supervisor
|
|
|
Which category of training is best associated with systematic instruction under actual working conditions?
A. General management training B. Commercial training C. On-the-job training D. Special training |
C. On-the-job training
|
|
|
Which category of training is best associated with courses taught at a General Motors training center?
A. General management training B. Commercial training C. On-the-job training D. Special training |
B. Commercial training
|
|
|
Which category of training is best associated with the USAF Non-Commissioned Officers Academy?
A. General management training B. Commercial training C. On-the-job training D. Special training |
A. General management training
|
|
|
Which Air Force training standard identifies the duties, tasks, and technical references to support training?
A. Education and training course announcements web page B. Career field education and training plan C. Specialty training standard D. Course training standard |
C. Specialty training standard
|
|
|
Select the most correct proficiency code, found in an STS, identifying task performance only.
A. B B. 2B C. 2 D. 2b |
C. 2
|
|
|
Select the most correct proficiency code, found in an STS, identifying subject knowledge.
A. B B. 2B C. 2 D. 2b |
A. B
|
|
|
What publication is best described as a comprehensive core-training document that identifies the life cycle of education and training requirements?
A. Education and Training Course Announcement Web Page B. Career Field Education and Training Plan C. Specialty Training Standard D. Course Training Standard |
B. Career Field Education and Training Plan
|
|
|
What training standard best identifies the most common tasks of an Air Force specialty?
A. Education and Training Course Announcement Web Page B. Career Field Education and Training Plan C. Specialty Training Standard D. Course Training Standard |
C. Specialty Training Standard
|
|
|
We train for all of these reasons with the exception of_____.
A. Inspection results B. Liability C. Safety D. Enforcing policies and procedures |
A. Inspection results
|
|
|
How many parts does the CFETP have, and how many sections does each part have?
A. 2 parts/3 sections each B. 2 parts/5 sections each C. 3 parts/3 sections each D. 3 parts/5 sections each |
B. 2 parts/5 sections each
|
|
|
What is the five-digit alphanumeric code describing a deploying force’s specific capability?
A. Unit Type Code B. Operations Plans C. Base Deployment Guidance D. SORTS Reporting |
A. Unit Type Code
|
|
|
What is the SORTS-level rating associated with a unit which is fully ready to go to war?
A. C-4 B. C-3 C. C-2 D. C-1 |
D. C-1
|
|
|
Who is responsible for outlining logistics squadron responsibilities in meeting deployment requirements?
A. Logistics Readiness Squadron Commander B. Deployment Processing Unit Officer C. Unit Deployment Manager D. Installation Deployment Officer |
A. Logistics Readiness Squadron Commander
|
|
|
What installation work center is responsible for controlling the overall deployment operation?
A. Deployment Processing Unit B. Deployment Control Center C. Cargo Deployment Function D. Personnel Deployment Function |
B. Deployment Control Center
|
|
|
What installation work center is responsible for providing personal services to deploying personnel?
A. Deployment Processing Unit B. Deployment Control Center C. Cargo Deployment Function D. Personnel Deployment Function |
D. Personnel Deployment Function
|
|
|
What package is best described as a series of assembled parts, purchased with operations and maintenance funds, and shipped at the time of vehicle deployment?
A. Mobility Readiness Spares Package (MRSP) B. Temporary Mission Support Kit (TMSK) C. Individual Tool Kit (ITK) D. Shop Tools and Equipment (STE) |
B. Temporary Mission Support Kit (TMSK)
|
|
|
What T.O. best describes the serviceability condition required for vehicles being shipped TDY or to a deployed location?
A. T.O. 36-1-191 B. T.O. 00-25-115 C. T.O. 00-5-15 D. T.O 36A-1-1301 |
A. T.O. 36-1-191
|
|
|
You would perform scheduled maintenance on a vehicle if due within how many days prior to shipment?
A. 90 B. 120 C. 150 D. 180 |
A. 90
|
|
|
What package is best described as a complete set of standard and metric hand tools?
A. Mobility Readiness Spares Package (MRSP) B. Temporary Mission Support Kit (TMSK) C. Individual Tool Kit (ITK) D. Shop Tools and Equipment (STE) |
C. Individual Tool Kit (ITK)
|
|
|
In which publication can you find a pre-deployment listing of required publications and forms you should take with you when deploying?
A. T.O 36-1-191 B. AFI 36-302 C. AFI 23-302 D. AFH 23-302 |
C. AFI 23-302
|
|
|
During wartime, who determines the scope of increased operator maintenance?
A. Organization’s Operator and Vehicle Control Officer B. Vehicle Control Officer C. Local Vehicle Fleet Managers D. Both B & C |
D. Both B & C
|
|
|
Increased Operator Maintenance allows the operators to accomplish what type of work on their own vehicles?
A. Engine Rebuild B. Replace Headlights C. Transmission Overhaul D. Replace Tires |
B. Replace Headlights
|
|
|
AFH 24-320 states Mobile Maintenance trucks fuel tanks should be how full at the end of the day?
A. 1/8 full B. ¼ full C. ½ full D. Full |
C. ½ full
|
|
|
Priority 1 vehicles are best associated with what type or grouping of vehicles?
A. Sortie generating vehicles B. Sortie sustaining vehicles C. Level A triage vehicles D. Level B triage vehicles |
A. Sortie generating vehicles
|
|
|
What level of triage of maintenance is assigned for repairs to a vehicle estimated to require over four hours of repair work?
A. Level A B. Level B C. Level C D. Both A & B |
C. Level C
|
|
|
What vehicle status reporting requirements are submitted, at weekly intervals, during the first 30 days of deployment operations?
A. Total Priority I vehicles, NMCM, NMCS, and vehicle losses B. Total Priority I and II vehicles, NMCM, NMCS, and vehicle losses C. Total NMCM, NMCS, personnel and skill-level shortfalls D. Total NMCM, NMCS, personnel and facility shortfalls |
B. Total Priority I and II vehicles, NMCM, NMCS, and vehicle losses
|
|
|
OLVIMS is normally established within how many days?
A. 5 days B. 10 days C. 30 days D. 60 days |
C. 30 days
|
|
|
Mechanics should create and maintain a tracking system for what kind of vehicles?
A. Commercial leased vehicles B. Government vehicles C. Mission-sustaining vehicles D. Mission-supporting vehicles |
A. Commercial leased vehicles
|
|
|
Reports are due to MAJCOM NLT what day of each month?
A. 1st of each month B. 5th of each month C. 7th of each month D. 10th of each month |
D. 10th of each month
|
