Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
16 Cards in this Set
- Front
- Back
- 3rd side (hint)
|
741-100
|
-Only use work packages 3, 8, and 10
|
|
|
|
Purpose of Computer Subsystem
|
-Correlates data used to control various avionics and non-avionics subsystems
|
|
|
|
There are two computers for the subsystem and both can be found on...
|
-003 00 Page 3 Paragraph 7
|
|
|
|
MC1 Primary Purpose
|
-Navigation
|
|
|
|
MC2 Primary Purpose
|
-Mission Accomplishment
|
|
|
|
-Mission Computer System
|
-A. Computes and controls the displays sent to the multipurpose display groups
-B. Computes and produces the weapon launch and weapon release commands -C. Provides Mode Control and Option Select output for various avionic equipment through the Electronic Equipment control -F. Controls option displays, BIT, and Navigation Controls and Displays |
Work Package 3, Page 3, Paragraph 5
|
|
|
Electronic Equipment Control
|
-Controls Communication, Navigation, and Identification systems
-Provides a median for manual entry of program data -Controls the automatic direction finder system |
|
|
|
EMCON - Emission Control
|
-Predetermined equipment is placed in a non-transmitting status
|
|
|
|
MC/HYD ISOL Control PAnel
|
-Distributes ground and aircraft power to the mission computers
|
|
|
|
Control Converter
|
-Functions as a translator to translate commands into a format compatable with the computer of the subsystem being communicated with
-Supplies option, scratchpad, and Communication Channel Display information to the EEC |
|
|
|
Multipurpose Display Group
|
-Provides the aircrew with up to date visual information about the performance of the aircraft
|
|
|
|
Memory Loader Verifier Set
|
-Loads operational flight programs into computer memory via MUXBUS
|
|
|
|
MC Operation is dependent on the...
|
-sharing of information between the avionics subsystems and the computer subsystems
|
|
|
|
MC Communicates with...
|
-All peripheral avionics equipment via the CSC using channels 1 and 2
|
|
|
|
Channel 3 is for...
|
-Computer to computer interface only
|
|
|
|
Mission Control Software
|
-All operating functions are loaded externally through the operational flight program tape and are controlled and monitored internally
|
|
