Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
5 Cards in this Set
- Front
- Back
To save the configuration variables to the startup configuration file in NVRAM, enter the following command at the privileged EXEC prompt
|
Router#copy running-config startup-config
|
|
Step 1 for configuring an Ethernet interface is
|
Enter global configuration mode
|
|
Step 2 in configuring an Ethernet interface is
|
Enter interface configuration mode
|
|
Step 3 in configuring an Ethernet interface is
|
Specify the interface address and subnet mask
|
|
Step 4 in configuring an Ethernet interface is
|
Enable interface
|