• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/5

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

5 Cards in this Set

  • Front
  • Back
To turn on or enable an interface, the command
no shutdown is entered
The shutdown command is used to
turn off the interface
The commands that are used to set a clock rate and enable a serial interface are as follows
Router(config)#interface serial 0/0

Router(config-if)#clock rate 56000

Router(config-if)#no shutdown
By default, interfaces are
turned off, or disabled
If an interface needs to be administratively disabled for maintenance or troubleshooting,
the shutdown command is used to turn off the interface