Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
110 Cards in this Set
- Front
- Back
|
The AFI that governes the current wing orginization and operation is ?
|
AFI 21-101
|
|
|
The key individual who allocates the maintenance resources required to meet mission requirements is whom?
|
The Wing Commander.
|
|
|
The total production effort and management of group maintenence functions are the responsibility of the ?
|
Group Commander
|
|
|
Who manages the squadron's cannibalization program?
|
Squadron maintenance officer / maintenance supervisor.
|
|
|
What is the responsibility of the maintenance operations center?
|
Notify appropriate agencies of severe weather warnings.
|
|
|
The purpose of the maintenance group is ?
|
To create and support the sortie-producing operations group.
|
|
|
Who manages the wing's maintenance quality improvement program?
|
Maintenance group commander.
|
|
|
Whose role is it to increase reliability and maintainability of aircraft and support equipment?
|
Quallity assurance.
|
|
|
The quality assurance program does what?
|
Determines aircraft and equipment condition, and personnel efficiency.
|
|
|
Which flight in the maintenance squadron supports the field assistance support team for calibration?
|
Test, measurement, and diagnostic equipment.
|
|
|
What are Air Force policy directives?
|
Orders of the SECAF to initiate, govern, or regulate actions of conduct by Air Force activities at any level.
|
|
|
Orders of the Secretary of the Air Force approved in the Secretariat or the Air Staff, and issued as departmental publications are called what?
|
Air Force Instructions (AFI's)
|
|
|
Air Force Policy Directive 90-1, Policy formulation, does what?
|
It sets the tone for all Air Force policy development.
|
|
|
Air Force manuals may be supplemented at what levels?
|
Any level.
|
|
|
As a rule, display of temporary visual aids should be limited to how long?
|
90 days or less.
|
|
|
Besides publishing bulletins and base or headquarters official bulletins, other types of bulletins are what?
|
Not authorized at any time.
|
|
|
What may not be included on a bulletin board?
|
Classified information.
|
|
|
Which is not a base-level use of maintenance data collection information?
|
Analysis of NTRS actions.
|
|
|
The MDC data element used to tie together all maintenance actions on a specific job is the?
|
JCN (job control number)
|
|
|
The first five digits of a job control number indicate what?
|
Year and Jullian date
|
|
|
A work center that contributes labor towards a maintenance requirement is a what?
|
Performing work center.
|
|
|
Into what does the computer not translate an identification number?
|
Repair action taken.
|
|
|
Which five-character maintenance data collection data element is used to identify the system or subsystem that requires maintenance?
|
Work Unit Code.
|
|
|
Which maintenance data collection data element is published in manuals for each weapon and support system?
|
Work Unit Code
|
|
|
What form is used for maintenance data collection when the Integrated Maintenance Data System is NOT available?
|
AFTO Form 349.
|
|
|
The number entered in the TAG NUMBER block of the AFTO form 349 comes from?
|
the AFTO form 350.
|
|
|
What is entered in column C of the AFTO Form 349 documenting a time compliance technical order (TCTO) modification?
|
First five characters of the TCTO data code
|
|
|
An entry of greater than 1 in the UNITS column (Column G) of the AFTO Form 349 indicates the number of
|
times the action taken was performed.
|
|
|
The entry in the CAT LAB (category labor) block on the AFTO Form 349 indicates the
|
type of man-hour expenditure.
|
|
|
An "X" placed in the SCH CODE (scheduled code) block of the AFTO Form 349 indicates
|
the computer must calculate the next calibration or maintenence due date.
|
|
|
Which block of the AFTO Form 349 is checked to indicate actions that affect the historical records of an end-item?
|
RECORDS ACTION.
|
|
|
Which form provides an interface between on- and off-equipment maintenance documentation, and also serves as an identification and status tag?
|
AFTO Form 350
|
|
|
Which AFTO Form is used as an accountability document for items managed under the due-in from maintenance program?
|
350.
|
|
|
Dates entered on the AFTO Form 350 pertaining to repair cycle times are used
|
as an aid in determining spares requirements
|
|
|
A red X symbol on an inspection form is cleared by who?
|
an authorized inspector initialing over the symbol.
|
|
|
What does a red dash on inspection forms indicate?
|
A scheduled inspection is overdue and has not been completed.
|
|
|
The symbol used to indicate an unsatisfactory condition that is NOT serious enough to ground an aircraft or remove equipment from service is a red
|
diagonal.
|
|
|
The integrated Maintenance Data System is a
|
base-level computer system used for maintenance management
|
|
|
How do maintenance personnel in the maintenance complex use the Integrated Maintenance Data System to communicate with the base computer system?
|
Via a remote terminal.
|
|
|
Correcting erroneous data in the integrated Maintenance Data System is a function of
|
data base management.
|
|
|
How often are Integrated Maintenance Data System reports produced and sent to higher headquarters?
|
At scheduled intervals.
|
|
|
How is the Integrated Maintenance Data System considered to be "user friendly"?
|
Keyboard entries are checked for compatibility.
|
|
|
What type of errors may NOT be detected by the integrated Maintenance Data System?
|
One-of-a-kind entries.
|
|
|
The Integrated Maintenance Data System minimizes maintenance data collection errors by
|
limiting the number of required entries by providing known information
|
|
|
The PRIMARY purpose of the Integrated Maintenance Data System screen 380 is to
|
provide an up-to-date list of open JCNs
|
|
|
Which Integrated Maintenance Data System screen can be viewed and option-selected to allow narratives to a specific job data record to be modified?
|
907, option 12.
|
|
|
An on-line inquiry option can be selected from the Integrated Maintenance Data System screen 099 by inputing the?
|
option number.
|
|
|
Which is NOT a function of the G081 Automated Maintenance Information System?
|
Personnel leave scheduling.
|
|
|
The four types of programs used in the G081 Automated Maintenance Information System are data input, data output,
|
batch, and variable information retrieval program (VIRP).
|
|
|
Of the four types of programs used in the G081 Automated Maintenance Information System, which is considered to be the "heart" of the system?
|
Data input.
|
|
|
users of the GO81 maintenance system know they are logged out when they see on the computer screen what word?
|
MOBILITY
|
|
|
Which is a basic principle of supply discipline?
|
Effective safeguard and preserve property.
|
|
|
Supply discipline starts with whom?
|
Each individual.
|
|
|
|
|
|
|
Property accountability is the obligation to do what?
|
To keep accurate , auditable records of property.
|
|
|
Which supply printout provides the user a list of all parts ordered but not recieved?
|
Due-out validation listing.
|
|
|
|
|
|
|
|
|
|
|
Property accountability is the obligation to do what?
|
To keep accurate , auditable records of property.
|
|
|
|
|
|
|
Which supply printout provides the user a list of all parts ordered but not recieved?
|
Due-out validation listing.
|
|
|
Which is a basic principle of supply discipline?
|
Effective safeguard and preserve property.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
If a sergeant takes possession of a box that falls off of a truck, what type of property responsibility does he or she assume?
|
Custodial responsibility
|
|
|
When a person responsible for property is transfered and the property remains with the orginization, the property responsibility does what?
|
Stays within the orginization
|
|
|
What is used to explain and record the circumstances that involves the loss, damage, or destruction of an equipment item that costs more than $250?
|
Report of Survey.
|
|
|
Unit nonexpendable equipment authorizations are based on what?
|
Unit mission and number of personnel authorized.
|
|
|
What provides a listing of equipment items required by the mission of an Air Force activity?
|
Allowance standard.
|
|
|
The purpose of the aircraft parts store is to do what?
|
Place the maximum number of aircraft spares as near to the flight line as possible.
|
|
|
The on-hand quantity of bench stock items does not normally exceed what?
|
A 60-day issue requirement.
|
|
|
Material Deficiency Reporting procedures can be found in what T.O.?
|
00-35D-54
|
|
|
Which deficiency report requires submission by message within three workdays after the discovery of the defficiency?
|
Category 2
|
|
|
The numbering system for Air Force T.O.'s can be found in which T.O.?
|
00-5-18
|
|
|
T.O. numbers are limited to how many total positions?
|
25
|
|
|
Which index T.O. lists all authorized indexes?
|
0-1-CD-1
|
|
|
Which index T.O. contains a cross-reference listing of data code numbers assigned to active TCTO's?
|
0-4-2
|
|
|
Which T.O. should you use to locate all the T.O.'s pertaining to a certain type of equipment?
|
List of Applicable Publications
|
|
|
Which type of technical manual is used in conjunction with troubleshooting requirements to isolate malfunctions?
|
Job Guide (JG)
|
|
|
Which techical manual contains data for the operation, servicing, and maintenance of equipment?
|
Other Equipment.
|
|
|
Which TO is not a type of TCTO?
|
Emergency Action.
|
|
|
Which TCTO is used to correct a condition that could result in a fatal or serious injury?
|
Immediate Action.
|
|
|
Which TCTO is identified by a series of red X's alternately spaced with red diagonals?
|
Urgent Action
|
|
|
Interim TCTO's are normally replaced by formal TCTO's within a maximum time period of how long?
|
10 Days.
|
|
|
Which TO is not an abbreviated TO?
|
Automation
|
|
|
Which letters are contained in the numerical designator of a checklist TO?
|
CL
|
|
|
Which type of TO is prepared in limited quantities?
|
Preliminary.
|
|
|
How are change pages inserted into existing TOs?
|
By replacing the page of the same number.
|
|
|
How are the pages of an appendix filed in a basic TO?
|
After the last page of the TO.
|
|
|
What are the 3 types of TO change reccomendations?
|
Emergency, Urgent, and Routine.
|
|
|
To find detailed instructions for preparing and submitting the AFTO Form 22, check in what TO?
|
TO 00-5-1
|
|
|
32-141-10-110-6 is an example of which type of Orginizational Maintenance Manual Set reference number?
|
SRU System/subsystem/subject number
|
|
|
The fourth element(-003) of an OMMS system/subsystem/subject number 34-11-10-003 identifies a what?
|
Shop replaceable unit.
|
|
|
What does the letter code in an OMMS reference designator identidy?
|
Component Type.
|
|
|
Which type of OMMS manual would you use for a brief overall description of aircraft systems?
|
General Vehicle.
|
|
|
A General system manual provides what?
|
Fault descriptions and fault isolation procedures.
|
|
|
Entries in the numerical index section of the IPB are listed how?
|
Alphanumerically.
|
|
|
Information provided by the reference designation index section of the IPB provides for cross-referencing what?
|
Figure, index number, and part number.
|
|
|
What section of the IPB would you open first to find a part with an unknown part number?
|
Table of contents.
|
|
|
What section of the IPB would you use to find specific information about a part with a known part number?
|
Numerical Index.
|
|
|
All Air Force computer software is designated and managed as what?
|
Computer program configuration items.
|
|
|
How many seperate components can a computer program identification number have?
|
Three
|
|
|
A computer program identification number (CPIN) prefix indicates the CPIN is what?
|
Assigned to a country standard computer software configuration item.
|
|
|
How many fields are in a CPIN identifier?
|
Four
|
|
|
The automated CPIN system provides a standardized system that does what?
|
Manages software.
|
|
|
US Air Force customers must establish CPIN requirements through where?
|
TO distribution offices.
|
|
|
Which major function of the automated CPIN system is used to deny unauthorized requests?
|
Distribution.
|
|
|
An automated CPIN system cross-reference compendium contains what?
|
Quick references for research aids.
|
|
|
An automated CPIN system command conpendium contains what?
|
CPINs identified with a MAJCOM designator.
|
