• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/94

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

94 Cards in this Set

  • Front
  • Back
What is the 1979 fisheries act called
The Fishery Conservation and Management Act of 1976 created a 200-mile offshore fishing zone to be controlled by the U.S.
When was the E-8 rank available
2 years as E-7, 10 years active duty, No trouble for 24 monthsWhen was the E-9 rank available?2 years as E-8, 12 years active duty, No trouble for 24 months
What is an engine sling that is repaired load tested to
200% working load
In what systems can Aluminum alloy tubing be utilized
Aluminum alloy tubing is used for both high-pressure and general purpose lines ; however, it is limited in certain areas of airborne hydraulic systems by SAE AS 5440.
What do you use to clean stainless steel control cables
with a clean dry course weave rag or fiber brush
What classification does a fuel leak that leaks 4 drops per hour fall into
Class C is for JP8/5 is 4 drops per minute REF: 01-1A-35
How many separate leaks are allowed in a class B fuel leak
Internal vented 2 places max REF: 01-1A-35
To what pressure do test manufactured tubing
twice the operating pressure of the system a minimum of 100 psi
To what pressure do you test vent and drain tubing
Vent tubes or drain tubes do not require proof pressure testing.
Who has the authority to clear an aircraft for flight that has sustained minor damage away from station
Commanding Officer after EO has evaluated malfunchion to be minor
Who has the authority to clear an aircraft for flight that has sustained major damage away from station
Commandant CG-711 with technical concurrence from Commandant CG-41
Who approves a request for an increase in allowance
(ALC was not an option)?Requested through AMMIS to ALC Item manager (IM). REF: PG-85-00-110
What is the minimum number of identification labels required on a 24 inch length of tubing
One label on each tube 24inch or shorter, one label on each end of tube 24inch or longer and each time a tube passes through a bulkhead to another compartment.
What size filter should a HYD. test stand have
3-MICRONS (ABSOLUTE)
What percentage of “Dead Head” time count towards crew rest
One half of the number of flight hours spent deadheading shall count as crew mission time. Deadheading shall not be calculated as part of crew rest time.
How many classifications of damage are there IAW the 1-1a-1
4, Negligible, repairable by patching, repairable by insertion, and requiring replacement.
How often is emergency egress training conducted
Once per calendar year.
What is the minimum shelf life of synthetic tubing
10 years from date cured What is the min. acceptance life of synthetic tubing?85% of shelf life remaining.
What Db level requires double hearing protection
104DB
How long is TYPE I preservation good for
- 90 days (tape and barrier)
How long is TYPE II preservation good for
- 1 yr (tape & barrier, top coat, strippable coating)
How long is TYPE III preservation good for
- Indefinite (ridged shelter, drop shroud, flex bag/cover)
What do you preserve fuel cells with
- 6081-10-10
Max allowable flight time in 7 days
- 50 hrs
Our tools must meet or surpass what standard
-ASE??
How much does PRIST lower the flashpoint of JP5
- 4degrees
What is required on a check stand near a fuel cell
-grounding wire
Electrical boxes, etc… How far off the deck
- 18 inches??
Green crosses for health stations are how big
12 in
What is an AEL MK III used for
-detect solids in fuel
Max amount of water allowed in fuel
- 10ppm
At what % do you test lifting slings after repair
200% of working load to proof load.
If a plane has major structural damage away from station, who can authorize further flight
- Commandant, CG-711 with advice from CG-41?
What is the most common type of hydraulic contamination
Solid matter is the type most often found in aircraft hydraulic systems and is generally referred to as particulate contamination.
What does R2 on the side of a tire mean
-retreaded twice
Grounded for how long after donating 200cc of blood
3 days (72 hours)
How many flight hours count as dead heading
-1/2 to your crew mission time.
What color is a danger tag
-red
What color are electrical boxes
-Blue
What color is a shock hazard
-orange
How do you mark empty cylinder
1577-2 stating that the cylinder is unserviceable/ Cylinder Status Tag to empty status
How far apart are the clamps on a 24” hose
-24”??
Shelf life of a hose
-85%min when accepted 10 year self life
Selected reserve gets how many paid inactive duty days
-48
How big is green cross on first aid
- 12 in
How do you know a turnbuckle is properly threaded
-Safety wire cannot pass thru
How often will the air be exchanged in battery rooms
3 to 4 air changes per hour.
PH on a wash rack
Ph 6.5-8.5
How much hair bulk is allowed for a male
- 1.5 inches
What mishaps warrant a formal mishap board
-class A and B
What’s the age range for attending the CG academy
-18-22?
Oxygen cylinders must have a barrier with a fire rating of
-half hour
What is max allowable sediments in fuel
- 1 mg per liter
How long to respond to an immediate (O) message
-30 min
How long to respond to a priority message
- 3 hours
When is double hearing protection required
- Over 104db
What type of filter do you use for hydraulic testing
-3 micron
What form is used for hazardous condition reporting
- CG 5082
Order of preference for manuals
-ACMS, CGTO, AFTO, NAV, Comm?
What valve for pressurized systems protects from over and under pressure
Cabin air pressure safety valve.
How do you know if a hose is twisted
-the lay line isn’t straight anymore
How long after wiping fuel do you wait to inspect a leak
Allow 6 minutes for fuel leak to develop. Ref. TO 1-1-3
What year were females allowed to attend OCS
-1973
Who is responsible for the salvage of an aircraft at the unit level
-CO
How is a special JOAP sample marked
-Red letters or a red cap??
What gas is used to inert a fuel cell
-Nitrogen
Who is responsible for the fuel farm
-MX officer??
How many broken strands allowed in a hoist cable
-none
What causes false alarms
-Sharp bends and kinks
What do you use to preserve struts in the desert
-6081-10-10??
How many steps to analyze a discrep
-five
What is the length of the trail line used during hoisting ops
-105ft
ACMS system is based on what
-MRL
Who can grant permission to take off after a precautionary landing has been made with minor damage
-CO
What are responsibilities of the CDAR
-serves as unit consultants and advisors in the admin of the unit’s addictions program, keeps command informed of status of personnel in treatment and provides support to personnel in need.
What privledges can a supervisor not withhold
-Normal liberty
Who can authorize temp modifications to check stands or use of temporary stands
-safety officer
Who is in charge of the flight safety plan at an AIRSTA
-CO
Solid contaminate of turbine fuel cannot exceed how many mg/liter
-1.0 mg/1
Why are there two 43 micron filters used in series in the MK III test kit
-it eliminates errors due to variations in color of different fuels
What does air in a hyd line cause
-severe mechanical damage, partial/complete loss of output pressure, inability to reprime, slow/erratic actuator movement, erosion of metering orifices and servo valves, and high fluid temps.
Where do you get bleed air from
Compressor Section
What is the required percentage of PRIST in fuel
- .07 to .15% by volume?
What is minimum amount of time in service to make E8
-10 yrs
At what percent are lifting devices tested to
-200%
How far must electrical boxes and switches be off the hangar deck
-18”
What priority is Afloat
INCONUS-PRI 03
What is galling
-a transfer of metal from one surface to another (severe rubbing)
How much of the kinetic energy of the exhaust gasses does the turbine transform into mechanical energy
-60% to 80% of the total exhaust gasses
months When are E-5 marks due?
April (all & October (AD only)
what system is corrosion resistant steel tubing required to be used?
external brake lines be made of stainless steel components (tubing, sleeves, nuts) to prevent damage caused by flying gravel and stones and ground handling accidents.
How long do you wait after cleaning up a fuel leak to recheck?
6 Minutes REF: 01-1A-35
How long are you grounded for after donating blood?
3day(72hours) for 200cc or more, 7 days for 500cc or more, no more than once every 120 days REF: M6410.3
How much more are you allowed to tighten a b-nut after it is torque?
flared tube assembly leaks, it may be tightened 1/16 turn beyond noted torque.