• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/29

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

29 Cards in this Set

  • Front
  • Back
5 Methods of Decontamination

1. Air Bleed


2. Recirculation


3. Purification


4. Flushing


5. Purging

The most effective method of decontamination
Recirculation considering man hours and material requirements
HSU-1 Hydraulic Fluid Capacity
3 Gallons
HSU-1 Reservoir Capacity
2 Gallon Reservoir with additional gallon on top
Length of HSU-1 Service Hose

7FT

Capacity of PMU-71 (HFSU) Reservoir
2 Gallons
Length of PMU-71 Service Hose
15FT
Hydraulic Fluid Bulk Dispensing Unit (HFBDU)

50 Gallon Drum

Type of Filter for HFBDU
10 Micron Filter on top
Length of Service Hose for the HFBDU

6FT

Capacity of Model 310 Reservoir
10 Gallons
Type of Filter for the Model 310
3 Micron Absolute Filter

Diesel Fueled Hydraulic Generators
A/M27T-5 and A/M27T-15

Electric Motor Hydraulic Generators


A/M27T-7 and T-14


Prior to Sampling, operate SE for how long?

5 Minute Circulation; not required for SE with a capacity of 3 Gallons or less
How many Pumps for SE 3 Gallons or less prior to Sampling?
5-6 pumps
Substitute for Caps

Clean Polyethylene Bags
Differential Pressure Indicator



monitors the pressure drop across the filter element; indicate element loading and the need for


replacement.



Reservoir Sink Check

(both pressurized and non-pressurized)


The presence of air or any compressible gas in the system will cause the pressurized reading to be lower

Test Stand Filter used for Recirculation Cleaning
3 micron Absolute Non-Bypass Filter
Operate all circuits (actuators) under-going decontamination for how many cycles?
a minimum of 15 complete cycles
Purification Cycle




Air Bleed

Performed when a Component is Replaced or Hydraulic System is Opened

Air Bleed Valve Location
High Points in A/C system, Filter Assembly or Remote system components (Actuators)
T/F: Recirculation is not capable of removing Water, Foreign Fluids or Dissolved solids?
True
Who authorizes the Cleaning Solution for Purging?
Fleet Support Team
Purging Procedure
contaminated fluid is Flushed; components are disassembled and Cleaned with approved Cleaning Solution.
Who Purges a decontaminated system?
Depot Level
What is the minimum Fluid level required to operate a system?
3/4 Full