Substance A Synthesis Lab Report

Decent Essays
It was determined that Substance A is a covalent molecular substance as it is a liquid at room temperature and therefore has a low melting point which is a property of a covalent molecular substance. Substance B was found to be a metallic substance as it demonstrated properties such as high melting point, conductivity as a solid etc. Substance C was found to be a covalent network structure as it did not conduct and was very hard and had a high melting point. Both Substances D and E were very brittle, had a high melting point and conducted in a solution, therefore it can be concluded that they are an ionic substance.
It is assumed that Substance B is aluminium as it appears silvery and melts into a bead like shape. Substance C is likely to be

Related Documents

  • Improved Essays

    Sterols in plants are almost completely derived from acetyl-coenzyme A (acetyl-CoA). Acetyl-CoA is dimerized to acetoacetyl-CoA that then forms 3- hydroxy-3-methylglutaryl-CoA (HMG-CoA) by a condensation reaction. HMG-CoA is reduced to mevalonic acid by 3-hydroxy-3-methylglutaryl-CoA reductase (HMGR), a rate-limiting step in human isoprenoid biosynthesis. HMGR over-expression in transgenic tobacco plants resulted in increased levels of total sterols, indicating that HMGR is a limiting enzyme also in plant sterol biosynthesis (Schaller et al., 1995). The next step in sterol synthesis is to form squalene from mevalonic acid, and this is performend by a series of reactions where the final step is catalysed by the squalene synthase enzyme (SQS).…

    • 681 Words
    • 3 Pages
    Improved Essays
  • Improved Essays

    Goals The goal of the lab was to investigate the properties and structure of an unidentified compound that was discovered in a local landfill. The group was called in to help determine the chemical and physical properties of the compound so we can let the people of the town know so it can be taken care of properly with or without further precautions to be taken. Another goal of this project was to devise the synthesis of the unknown compound. Experimental Design In order to determine the correct identity of our unknown compound, we first started with a couple preliminary tests, which include physical state and smell.…

    • 757 Words
    • 4 Pages
    Improved Essays
  • Decent Essays

    C. 5.12 Lab Report

    • 143 Words
    • 1 Pages

    R.C. 5.9 Mathematics (Mobile Infant) Activity: “Stack Them Up” Materials: Stacking blocks, nesting cups, measuring cups Infants are continually growing in all areas of development. In this activity, the goal is to get the infant to stack their blocks or cups. The teacher would have the child sit on the floor or at a table with their toys.…

    • 143 Words
    • 1 Pages
    Decent Essays
  • Improved Essays

    Unknown Lab Report

    • 750 Words
    • 3 Pages

    Materials. Numerous substances in the experiment were used. The most frequently used was the unknown due to the need to test its physical and chemical qualities. When a solution of the unknown was made, 1.000 g of the unknown and 1.0 mL of water was used to make it. To test for the possible ions, 1.0 mL of silver nitrate and 1.0 mL of nitric acid were used for the ion test.…

    • 750 Words
    • 3 Pages
    Improved Essays
  • Improved Essays

    Asa Synthesis Lab Report

    • 300 Words
    • 2 Pages

    The purpose of the experiment was about recrystallization of crude ASA from crude ASA, then analyze the yield and melting point of Recrystallized product, test for Purity of Recrystallized ASA by using thin layer chromatography and analysis of Recrystallized Acetylsalicylic Acid by Spectroscopy to compare these results with another experiment about creating an Aspirin from Salicylic Acid. In this experiment, 0.1241 gram of Recrystallized ASA was produced from 1.1754 gram of Crude ASA and the yield of reaction is 10.56%. This yield is lower than the yield by creating an Aspirin from Salicylic Acid because the crystallized product is purer because we did not add another chemical in. For the melting point of recrystallized ASA, Mel-temp was used…

    • 300 Words
    • 2 Pages
    Improved Essays
  • Improved Essays

    The goal of the lab was to identify an unlabeled compound found in the chemistry stockroom to be able to dispose of it properly. This lab demonstrated the process of identifying an unknown compound as well as synthesizing the compound. Identifying the compound consisted of performing various tests to detect the chemical and physical properties of the compound and comparing it to the list of possible compounds. The tests conducted were the solubility test which the compound fully dissolved in water, the flame test which had no discoloration when held in the flame, cation and anion tests which showed the existence of some halides like Cl, Br, and I, pH test in which the compound had a pH of 6, and the conductivity test which had an average value…

    • 1965 Words
    • 8 Pages
    Improved Essays
  • Improved Essays

    Module 1 Lab Report

    • 386 Words
    • 2 Pages

    Nettie Stauts January 26, 2018 CDT-2413 Module 1 Lab Parents Perspective: The parents were apprehensive, but eager, entering their son Luke in a child care program. They were getting early intervention home-centered services in which Luke had progressed with assistance from his therapist and babysitter. He lacked social developmental skills and they heard about inclusion although unfamiliar with the concept. They were adapted interacting with Luke through gestures and augmentative communication devices yet anxious about his communication in the classroom.…

    • 386 Words
    • 2 Pages
    Improved Essays
  • Improved Essays

    Formation of alcohol from acid catalyzed addition of water to a carbon-carbon double bond is hydration of alkenes. In this experiment norbornene was used as an alkene to lead the formation of the alcohol. The purpose of this experiment was to make and receive weight of norborneol, percent yield and the melting point of the product. Hydration and the opposite reaction of dehydration establish equilibrium between the two competing processes. To complete the reaction of hydration, double bond will require excess water and to complete the reaction of dehydration of an alcohol, the water has to be removed from the alcohol.…

    • 450 Words
    • 2 Pages
    Improved Essays
  • Improved Essays

    Micro Chem Lab Report

    • 935 Words
    • 4 Pages

    -SiO2@ON/glass was coated with poly(methyl methacrylate) (950 PMMA C4, Micro Chem, 2 mL) by spin coating (500 rpm for 5 s, 1,000 rpm for 5 s, 2,000 rpm for 5 s, 1,000 rpm for 5 s, SP-7200GT spin coater, Intec systems). The plate was cut into 4 pieces of 1.5 × 2.5 cm2 area (Refer to Figure S3), and then added to 5% HF solution (100 mL). In the first 1 min, the glass plate was detached from S-SiO2@ON/glass and removed. The S-SiO2@ON was further etched for 2 h. Caution: HF solution is extremely dangerous to be inhaled and touch. Thus, it should be handled with extreme caution and specific gloves in a good hood.…

    • 935 Words
    • 4 Pages
    Improved Essays
  • Improved Essays

    Benzene, rings are very prevalent in many products that are used on a daily biases by humans, and compounds that contain benzene are often referred to as being aromatic. Benzene has characteristics that differ from many compounds causing it to react differently when mixed with certain compounds. Although benzene has three double bonds, it does not react like a normal alkene in terms of addition reactions. For example, when bromine reacts with a simple carbon-carbon double bond it forms dibromo. Benzene does not do this unless it is in the presence of a strong catalyst, making it no longer an addition reaction, but an electrophilic substitution (Structure of Benzene, 2001).…

    • 857 Words
    • 4 Pages
    Improved Essays
  • Improved Essays

    Aspirin is produced from the reaction of Salicylic Acid and Acetic Anhydride. Aspririn is a analgesic and antipyretic. The purpose of this experiment is to produce aspirin and analyzing it for yield. Twenty grams of salicylic acid, molecular weight 138.1g/mol, 5.0 mL of acetic anhydride, molecular weight 102.1g/mol and density 1.08g/mL, and 5 drops of concentrated sulfuric acid were mixed in a 125mL flask. The mixture was heated in a 70°C hot water bath then taken out to cool to room temperature.…

    • 455 Words
    • 2 Pages
    Improved Essays
  • Improved Essays

    In this experiment, two cations in an unknown solution were found using qualitative analysis. For Part A, the solution was to contain either silver or lead, while in Part B, the solution that was set on the side form Part A was identified to contain either calcium or barium. Part C explored a different method through the use of cation flame tests to observe colored flames from six metal chloride solutions. In Part A, the initial step was to add HCl to the unknown sample.…

    • 885 Words
    • 4 Pages
    Improved Essays
  • Improved Essays

    Lab Report Cation Essay

    • 875 Words
    • 4 Pages

    If this experiment were to be repeated, another cation could be added for identification or a flame test could have been done with the solutions in Part A and Part B in order to determine the cation identity. In Part A of this experiment, after carefully following each procedure, lead was concluded to be the cation present in the #2 unknown aqueous solution. This was concluded because of the formation of a yellow powdery precipitate inside the solution during the sixth step. This was as expected.…

    • 875 Words
    • 4 Pages
    Improved Essays
  • Improved Essays

    Abstract: The objective of this experiment was to synthesize aspirin from salicylic acid and acetic anhydride. The general theory behind this experiment was to study the synthesis of a drug from organic materials. During the experiment, esterification had occurred between reactants salicylic acid and acetic anhydride. Then, phosphoric acid would catalyze the reaction and water would be added to decompose the remaining acetic anhydride. Through the process of filtration, aspirin crystals were collected and separate from the liquid acetic acid-water solution.…

    • 993 Words
    • 4 Pages
    Improved Essays
  • Improved Essays

    Introductions: The purpose of this experiment is to synthesize acetaminophen and esters in order to apply the process of retrosynthetic analysis to determine the unknown alcohols used to produce the esters. Acetaminophen, a popular active ingredient in many over-the-counter drugs, is used as a pain reliever and a fever reducer. It is synthesized from the reaction between a carboxylic acid and an amine; thus, acetaminophen contains hydroxyl and amide functional groups.1 C6H7NO + C4H6O3 C8H9NO2 + C2H4O2 This reaction is commonly known as a condensation reaction.…

    • 839 Words
    • 4 Pages
    Improved Essays